Category List

All products

All category

BUMFA Projects

RC Bundle

Microcontrollers

Tools & Equipment

Electronic Components

Chasis & Mechanical Parts

Communications Module

Display and Interface

Batteries and Power

Motor Drivers and Motor

Sensors and Module

BUMFA Collectables

3d Printing Services

Category List

All products

All category

BUMFA Projects

RC Bundle

Microcontrollers

Tools & Equipment

Electronic Components

Chasis & Mechanical Parts

Communications Module

Display and Interface

Batteries and Power

Motor Drivers and Motor

Sensors and Module

BUMFA Collectables

3d Printing Services

Bluetooth Protocol: Bluetooth Specification V4.0 BLE USB Protocol: USB V2.0 Operating Frequency: 2.4GHz ISM band Sensitivity: ≤-84dBm at 0.1% BER

Arduino Android IOS HM-10 BLE Bluetooth 4.0 CC2540 CC2541 Serial Wireless Module

Details:

Feature
It’s easy to use and completely encapsulated. You can set it as a slave or master. You can use the AT command set the baud rate. Coverage up to 60 meters. Built-in PCB antenna. UART design. Support bridge direct-driven mode simultaneously (no need for extra CPU). 20ms connection interval (default), quick to connect; Support AT instruction, to modify the baud rate of the serial port, gain MAC address and modify module name. Support AT instruction, to adjust the Bluetooth connection interval and control the forwarding rate (dynamic power consumption adjustment). Support APP; IO expansion. 2 channel ADC input (14 bit). 4 channel PWM (120Hz) output. The RSSI successive acquisition, auto read, and notification to APP (used in anti-lost alarm). Power indicator/alert. Support anti-hijack password setup, modification, and restoration. Ultra-low power consumption standby mode. BUMFA

Bluetooth Protocol: Bluetooth Specification V4.0 BLE
USB Protocol: USB V2.0
Operating Frequency: 2.4GHz ISM band
Modulation Mode: GFSK (Gaussian Frequency Shift Keying)
Transmitting Power: ≤4dBm
Sensitivity: ≤-84dBm at 0.1% BER
It’s easy to use and completely encapsulated.
You can set it as slave or master.
You can use AT command set the baud rate.

HM-10 BLE Bluetooth 4.0 CC2541 Wireless Module is a BLE module for an embedded system to get BLE wireless communication with BLE capable devices (e.g. Android, iPhone, and iPad).

It is fully configurable by a rich and well documented AT command-set and allows transparent data communication via serial UART (default baud rate 9600bps). BUMFA

The Bluetooth4.0 HM-10 is basically a breakout board for cc2541, it broke out the LED pins, RX/TX and also adding the voltage regulator that regulates 5v to 3.3 v. BUMFA

HM-10 and HM-11 series Bluetooth module use TI CC2540 chip, configure 256KB space and support the AT command. Users can change the role (master, slave mode) and the serial port baud rate, equipment name, matching password and other parameters on-demand. It is very flexible to use.

The most complete, most convenient, and most stable Bluetooth data transmission, remote control and data acquisition module. Master-slave in one, transparent transmission, replacing the serial port. Remote control, transparent transmission, MCU is unnecessary. Remote data acquisition, transparent transmission, MCU is unnecessary. Featured By BUMFA.

Arduino Android IOS HM-10 BLE Bluetooth 4.0 CC2540 CC2541 Serial Wireless Module

Name: Arduino Android IOS HM-10 BLE Bluetooth 4.0 CC2540 CC2541 Serial Wireless Module
Brand: BUMFA
Price: 300 BDT
Availability: InStock

Price

300 BDT465 BDTSave 165 BDT

Details:

Feature
It’s easy to use and completely encapsulated. You can set it as a slave or master. You can use the AT command set the baud rate. Coverage up to 60 meters. Built-in PCB antenna. UART design. Support bridge direct-driven mode simultaneously (no need for extra CPU). 20ms connection interval (default), quick to connect; Support AT instruction, to modify the baud rate of the serial port, gain MAC address and modify module name. Support AT instruction, to adjust the Bluetooth connection interval and control the forwarding rate (dynamic power consumption adjustment). Support APP; IO expansion. 2 channel ADC input (14 bit). 4 channel PWM (120Hz) output. The RSSI successive acquisition, auto read, and notification to APP (used in anti-lost alarm). Power indicator/alert. Support anti-hijack password setup, modification, and restoration. Ultra-low power consumption standby mode. BUMFA

Bluetooth Protocol: Bluetooth Specification V4.0 BLE
USB Protocol: USB V2.0
Operating Frequency: 2.4GHz ISM band
Modulation Mode: GFSK (Gaussian Frequency Shift Keying)
Transmitting Power: ≤4dBm
Sensitivity: ≤-84dBm at 0.1% BER
It’s easy to use and completely encapsulated.
You can set it as slave or master.
You can use AT command set the baud rate.

HM-10 BLE Bluetooth 4.0 CC2541 Wireless Module is a BLE module for an embedded system to get BLE wireless communication with BLE capable devices (e.g. Android, iPhone, and iPad).

It is fully configurable by a rich and well documented AT command-set and allows transparent data communication via serial UART (default baud rate 9600bps). BUMFA

The Bluetooth4.0 HM-10 is basically a breakout board for cc2541, it broke out the LED pins, RX/TX and also adding the voltage regulator that regulates 5v to 3.3 v. BUMFA

Bluetooth Protocol: Bluetooth Specification V4.0 BLE USB Protocol: USB V2.0 Operating Frequency: 2.4GHz ISM band Sensitivity: ≤-84dBm at 0.1% BER

Details:

Feature
It’s easy to use and completely encapsulated. You can set it as a slave or master. You can use the AT command set the baud rate. Coverage up to 60 meters. Built-in PCB antenna. UART design. Support bridge direct-driven mode simultaneously (no need for extra CPU). 20ms connection interval (default), quick to connect; Support AT instruction, to modify the baud rate of the serial port, gain MAC address and modify module name. Support AT instruction, to adjust the Bluetooth connection interval and control the forwarding rate (dynamic power consumption adjustment). Support APP; IO expansion. 2 channel ADC input (14 bit). 4 channel PWM (120Hz) output. The RSSI successive acquisition, auto read, and notification to APP (used in anti-lost alarm). Power indicator/alert. Support anti-hijack password setup, modification, and restoration. Ultra-low power consumption standby mode. BUMFA

Bluetooth Protocol: Bluetooth Specification V4.0 BLE
USB Protocol: USB V2.0
Operating Frequency: 2.4GHz ISM band
Modulation Mode: GFSK (Gaussian Frequency Shift Keying)
Transmitting Power: ≤4dBm
Sensitivity: ≤-84dBm at 0.1% BER
It’s easy to use and completely encapsulated.
You can set it as slave or master.
You can use AT command set the baud rate.

HM-10 BLE Bluetooth 4.0 CC2541 Wireless Module is a BLE module for an embedded system to get BLE wireless communication with BLE capable devices (e.g. Android, iPhone, and iPad).

It is fully configurable by a rich and well documented AT command-set and allows transparent data communication via serial UART (default baud rate 9600bps). BUMFA

The Bluetooth4.0 HM-10 is basically a breakout board for cc2541, it broke out the LED pins, RX/TX and also adding the voltage regulator that regulates 5v to 3.3 v. BUMFA

Arduino Android IOS HM-10 BLE Bluetooth 4.0 CC2540 CC2541 Serial Wireless Module

Price

300 BDT465 BDTSave 165 BDT

Details:

Feature
It’s easy to use and completely encapsulated. You can set it as a slave or master. You can use the AT command set the baud rate. Coverage up to 60 meters. Built-in PCB antenna. UART design. Support bridge direct-driven mode simultaneously (no need for extra CPU). 20ms connection interval (default), quick to connect; Support AT instruction, to modify the baud rate of the serial port, gain MAC address and modify module name. Support AT instruction, to adjust the Bluetooth connection interval and control the forwarding rate (dynamic power consumption adjustment). Support APP; IO expansion. 2 channel ADC input (14 bit). 4 channel PWM (120Hz) output. The RSSI successive acquisition, auto read, and notification to APP (used in anti-lost alarm). Power indicator/alert. Support anti-hijack password setup, modification, and restoration. Ultra-low power consumption standby mode. BUMFA

Bluetooth Protocol: Bluetooth Specification V4.0 BLE
USB Protocol: USB V2.0
Operating Frequency: 2.4GHz ISM band
Modulation Mode: GFSK (Gaussian Frequency Shift Keying)
Transmitting Power: ≤4dBm
Sensitivity: ≤-84dBm at 0.1% BER
It’s easy to use and completely encapsulated.
You can set it as slave or master.
You can use AT command set the baud rate.

HM-10 BLE Bluetooth 4.0 CC2541 Wireless Module is a BLE module for an embedded system to get BLE wireless communication with BLE capable devices (e.g. Android, iPhone, and iPad).

It is fully configurable by a rich and well documented AT command-set and allows transparent data communication via serial UART (default baud rate 9600bps). BUMFA

The Bluetooth4.0 HM-10 is basically a breakout board for cc2541, it broke out the LED pins, RX/TX and also adding the voltage regulator that regulates 5v to 3.3 v. BUMFA